All you need to do is click on the word "Radar" after launch. Therefore, you will have to use English to discover networks. How to search for networks with Xirrus Wi-Fi InspectorAs mentioned above, this program is not available in Russian. If this is not a problem for you, then the Xirrus Inspector is perfect for you. The program is only available on English language. In this way, you can determine exactly where to place the router or router in order to get a connection between it and your laptop and then receive a stable high quality signal.Īnother interesting feature of this program is the presence of two buttons that allow you to quickly connect to one of the detected networks.įlaws?!? Yes, for some people it is one. Xirrus Inspector allows you to check the speed and quality of the Wireless connection ("Speed Test" and "Quality Test" buttons). Using the "Radar" function, the program scans for all wireless signals that your adapter can intercept. It can be an interesting alternative to Vistumbler and Netstumbler. Xirrus Inspector is a real radar for monitoring networks - of course for a laptop (computers usually do not have such adapters, but you can install it yourself using the USB interface). Xirrus Wi-Fi Inspector, which you can download for free right here via the direct link at the end of the post. It demon paid program to search for wifi networks. Windows 7, like all other versions, has such a tool at its disposal, but there is a better option. Now attempt to connect to the hotspot/WiFi network.Sometimes you may need to search for wifi networks. Hit Ok, close the dialog behind it, all the usual stuff. The setup is a bit similar to Android, although set the Subnet Mask to something like 255.255.255.0 or 255.255.255.255. Don't forget UAC :((Ĭlick on Internet Protocol Version 4 (aka ipv4), and click the Properties button below it. On Windows (don't care what version): Open Control Panel, navigate to Network & Sharing Center (usually under Network & Internet), click "Change Adapter settings", right-click Wi-Fi (may be different depending on conditions), and click Properties. On IPhone, I have never used an IPhone/IPad, so research that :( Set DNS 1 to whatever DNS server you use (for testing, 8.8.8.8, which is Google's public DNS server). Android may auto-fill the other values for you, but if not, set Gateway to 192.168.137.1 You may have to play around with this value (last digit) to get it to work. Enable Advanced Options, scroll down to IP Settings, set the value under it to Static, and scroll down to IP Address, and set it to the specifics of your WiFi network (e.g, 192.168.137.214, as displayed on their page). Open Settings, go to WiFi/Wireless (or WLAN on some versions), navigate to the WiFi Network List, press-and-hold on your network, and press "Modify Network". You can confirm this by bypassing DHCP and using a static IP. If you really can trust them and you think they forgot something in their product, read below.Īs mentioned above, it could be possible that there isn't a DHCP server built into MyPublicWiFi. Try looking around for another solution before going too much further. (for example "you virtual WIFI-Hotspot"). The creator(s) of MyPublicWiFi may not have built their product well (for example, not including a integrated DHCP server?), and incorrect grammer almost always sets off my alarms. I really don't like the look of their page.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |